Plastic Pressure Kit for FermZilla

Unlock the FermZilla’s true potential with the FermZilla Pressure Kit. This will enable fermenting under pressure, carbonating, and serving without ever needing to move beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla’s lid. A silicone dip tube with stainless steel float work as the beverage out, allowing only the clearest beer from top of the tank to be dispensed. The Pressure Kit will turn the FermZilla into a true unitank!

Includes one red and one yellow ball lock cap to help differentiate which one is being used for liquid and which one for gas. Either color can be used for either function.

The silicone dip tube is 31″ long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack.

With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you’re pulling samples mid-fermentation!

Key Features:

Ferment beer under pressure to reduce ester and fusel alcohol production
Always draw clear beer with the floating dip tube
Keg beer that has already been carbonated
Use CO2 to push beer into a keg or through a filter into a keg
Eliminate kegging altogether by carbonating and serving directly from the FermZilla

Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank.